| A4VG40液压配件 | A10VG45液压配件 | A2FM32液压配件 | A2FM56液压配件 | A2FM63液压配件 | A6VE80液压配件 | A6VE107液压配件 | A11VG50液压配件 | A8V107液压配件 |
| PV21液压配件 | PV22液压配件 | PV23液压配件 | PV24液压配件 | PV25液压配件 | PV26液压配件 | HPV55液压配件 | BPV50液压配件 | HMV105液压配件 |
进口倒吊桶式疏水阀 美国进口疏水阀 美国力沃LEO阀门
美国LEO力沃阀门产品包括，高温高压阀门，球阀，电磁阀，针型阀，蝶阀，闸阀，截止阀，止回阀，过滤器，蒸汽疏水阀等，根据使用场合不同需求可选不同材质，例如铸钢（碳钢），不锈钢，锻钢，球墨铸铁，铸铁。
【美国LEO进口倒吊桶式疏水阀】
〖INVERTED BUCKET TRAP〗
〖美国力沃LIK倒吊桶式疏水阀〗
美国进口倒吊桶式蒸汽疏水阀它是利用冷凝水和蒸汽密度差的工作原理，内部结构是由杠杆系统连接倒吊桶，克服蒸汽压力开关。倒吊桶式疏水阀内部是一个倒吊桶为液位敏感件，吊桶开口向下。装置刚启动时，管道内出现空气和低温冷凝水，此时疏水阀是全开放，空气和低温冷凝水迅速排出，装置很快提升温度。当蒸汽进入倒吊桶内，倒吊桶产生向上浮力，倒吊桶连接杠杆带动阀芯关闭阀门。倒吊桶上开有一小孔，能自动排空气，当一部份蒸汽从小孔排出，另一部份蒸汽产生凝结水，倒吊桶失去浮力向下沉，倒吊桶连接杠杆带动阀芯开启阀门。当蒸汽再进入倒吊桶内，阀门再关闭，循环工作，间断排水。
美国力沃倒吊桶式蒸汽疏水阀是机械型蒸汽疏水阀中最坚固的疏水阀之一，它的优点是：不怕水击，能连续排不冷凝气体，抗污性能好；最高背压≥90%，所有内件都是不锈钢制造，耐磨损、抗腐蚀；球形阀芯和阀座是线接触，密封性能好，使用寿命长；间断排水和连续排水，能排接近饱和温度冷凝水，使加热设备达到最佳工作效率。倒吊桶式蒸汽疏水阀的阀座处于水密封的保护下，工作时无新鲜蒸汽泄漏，节能效果好。
它适用于石油、化工、****、造纸、制药等工业蒸汽加热设备和蒸汽管网的阻汽排水。
〖Inverted Bucket Trap〗
The interior of the inverted bucket steam trap: this valve adopts the operating principles of density difference between condensate water and steam, and the leverage system connects with inverted bucket to form its internal structure, thus controlling the open and close of the steam pressure. The interior of the inverted bucket steam trap is an inverted bucket, a liquid level sensitive part, with the bucket’s opening downward. When the device just started, air and low temperature condensate water occur in the pipes, at the moment the steam trap opens thoroughly, the air and low-temperature condensate water are discharged rapidly and the temperature of the device rises immediately. When any steam enters into the inverted bucket, the bucket will obtain buoyancy and the fixed lever of the bucket drives the valve core to close the valve. There is small aperture on the inverted bucket, which can discharge air automatically. As some of steam is discharged from such aperture, while other steam produces condensate water. The inverted bucket loses the buoyancy and sinks down and its fixed lever drives the valve core to open the valve. When the steam re-enters into the bucket, the valve will close again. It repeats the said procedures to discharge water intermittently.
The interior of the inverted bucket steam trap is one of the most strong steam traps among mechanical steam trap, and its strength are shown as follows: can resist water hammer and drain non-condensing air continuously, with good anti-pollution performance; the maximum back pressure being ≥90%; all internal parts are made of stainless steel with anti-abrasion and anti-erosion capability; the spheric valve core and valve seat realize line contact, with excellent sealing performance and long service life; it can drain intermittently and continuously and can discharge the condensate water that is nearly at saturation temperature to offer optimal work efficiency to the heating equipment, its steam trap valve seat is protected by water sealing, so no fresh steam will leak out during the operating process to obtain good energy-saving effects.
The product applies to such industrial steam heating equipment as petroleum, chemical, printing, paper making and pharmaceuticals and discharge of the steam pipe network.
【优点】
【1】内腔所有运动部件均为不锈钢，耐磨损，耐腐蚀。
【2】由于蒸汽不能到达被水封的阀座孔，所以无蒸汽损失，高效节能。
【3】浮桶倒置，不会被破坏压扁，不怕水击，寿命长。
【4】倒置桶顶部设有排气孔，连续排空气性能好，不会形成冷滞后和气堵。
【5】不受背压的影响，在高的背压下能很好地工作。
【6】工作可靠，只有两个运动部件 (自由杠杆结构和倒置桶 ) ，故不会产生卡阻。
【7阀座与阀瓣在阀的顶部，阀瓣在开关中可以使污物通过，有良好的自我清洗性能 ，无污物困扰。
〖Merits〗
〖1〗 All moving parts of the internal cavity are made of stainless steel, capable of resistance to abrasion and erosion.
〖2〗As the steam cannot reach the sealed aperture of the valve seat by water, the steam will not lose but has high efficiency and save energy.
〖3〗 The float bucket is located inversely. It can resist to water’s strike and has long service lift.
〖4〗The invented bucket has gas vent and performance of discharging the air continuously is excellent, without forming cool hysteresis and air blocking.
〖5〗 It is free of the affect of the back pressure and can perform well under high back pressure.
〖6〗It has reliable operation and only two moving parts—free lever structure and inverted bucket, so no blockage is produced.
〖7〗The valve seat and valve disc are located at the top of the valve. The valve disc allows the pollutants to pass, so it attains good self-cleaning performance, without affected by pollutants.
美国力沃国际集团中国广州销售总部
美国力沃国际集团高度重视中国市场的开发，根据力沃总裁Williams提出的“高品质的阀门，全方面的技术支持，完善的服务”的发展理念，美国LEO力沃阀门已经广泛应用在中国的蒸汽系统、石化系统、电力系统、食品系统，配套设备、冶金系统、水系统等领域。
手机：13826088101 电话：020-61132877 61139066
传真：020-32398971 网址：http://www.020fm.com
网址：http://www.gzfm.cn 邮箱：loe399@163.com
